######################################################################
#
#      MosChip USB Compound Device driver installation notes
#
######################################################################


======================================
1. Windows2000/XP Driver Installation
======================================

This document will present the steps needed to install or update the Drivers 
for MosChip USB Compound Device products.

For this example, the MCS7715 was used as the test case.
This device offers One Serial Port, and one IEEE-1284 style Parallel Port.

1. Download the appropriate Drivers from the Web-Site.
-------------------------------------------------------

    a. http://www.moschip.com
	i) Click the "Products" button.
	ii) Click the "USB" button.
	iii) In the row for the product you wish to install, click 
              "Drivers, Release Notes and Installation Guides".
	iv) Click the icon under the Operating System you are using.

    b. Allow the ".zip" file to be downloaded to your local computer.

    c. Unzip the Driver files to a directory on your Hard Disk.

    d. Check the new folder with the Driver files for a "Readme" file that 
       may have additional or special installation instructions. Use those 
       instructions in addition to, or instead of, these instructions if 
       present.


2. Installing Drivers for the first time.
------------------------------------------

    a. Turn the computer ON.

    b. Run the Setup.EXE program. This program is usually 
       located in the Installation disk supplied with this product.

    c. Setup dialog will display 'Press "Install" button to Install the 
       drives for Moschip USB Serial/Parallel compound device. For cancelling 
       the installation press "Exit" button.'.

    d. Press "Install" to start the installation.

    e. Now the installer will display a message "Installation is in
       Progress... Please Wait!"

    f. Then the installer should display 
       "Installation completed. Press "Exit" to terminate the application. 
       No need to restart the machine. Unplug and Replug the device if it is 
       currently connected.  
	
    g. Click Exit to close the installer. Plug-in the USB compound device to the 
       one of the USB port.

    h. Windows should detect the new USB device, and automatically install 
       the drivers for the new hardware connected.
    
    i. When the Windows desktop is displayed, the Driver installation is complete.

Notes:
------
    While installing Drivers on Windows 2000 and Windows XP, it is to be noted that 
	user should click "Next" directly, when the system O.S. reminds user that 
	the provided drivers doesn't have a digital signature.


3. Updating / Reinstalling Drivers:
------------------------------------------

    a. Turn the computer ON.

    b. Run the Setup.EXE program. This program is usually 
       located in the Installation disk supplied with this product.

    c. Setup dialog will display 'Press "Install" button to Install the 
       drives for Moschip USB Serial/Parallel compound device. For cancelling 
       the installation press "Exit" button.'.

    d. Press "Install" to start the installation.

    e. Now the installer will display a message "Installation is in
       Progress... Please Wait!"

    f. Then the installer should display 
       " Driver for this device is already installed in this system! To update/reinstall 
       press OK! To abort installation press cancel!". Press OK to Update the drivers.

    g. Then the Installer should display "Moschip USB to Serial/Parallel Adapter 
	   Drivers Installed. Press "Reboot Now" for installation to take effect. Else press 
       "Reboot Later"."

    g. Click "Reboot" for the changes to take effect.

    h. After the machine is starts back, connect the Moschip USB Serial/Parallel 
       compound device.

    i. Windows should detect the new USB device, and automatically install 
       the drivers for the new hardware connected.
    
    j. When the Windows desktop is displayed, the Driver updation is complete.


Notes:
------
    While installing Drivers on Windows 2000 and Windows XP,
    it is to be noted that user should click "Next" 
    directly, when the system O.S. reminds user that the provided drivers doesn't 
    have a digital signature.


4. Check Driver Installation.
------------------------------

    a. Open the Windows Device Manager
	i) Right-Click the "My Computer" icon on the Desktop.
	ii) Select "Properties" from the drop-down menu.
	iii) Click the "Hardware" tab.
	iv) Click the "Device Manager" button to show the current Hardware list.

    b. Confirm that the New Hardware has been included
	i) MosChip USB Compound Device is in the Universal Serial Bus Controllers. 
	ii) " MosChip USB SerialPort (COMn)"  in Ports (LPT & COM) categery 
	ii) " MosChip USB ParallelPort (LPTn)"  in  Ports (LPT & COM) categery 
	iii) In our case, one  Serial Port and one Parallel Ports were added.


5. Removing Previously Installed Drivers
-----------------------------------------

Sometimes it will be desirable or even necessary to remove the previously installed 
drivers, so that a new, clean installation can be performed. Drivers can get 
corrupted when being written to their installation medium (CD-ROM etc.). If this 
happens, the drivers may not install properly.Even if the installation proceeds 
without errors, the drivers may not work. Sometimes older outdated drivers are 
shipped with a product. Newer machines may require newer updated drivers, but the 
older drivers prevent them from being installed. The easiest way to remove old 
drivers is to use the MosUPortUninst.EXE program (located in WINNT\System32 
directory or in the Installation disk supplied with the product). 


Using MosUPortUninst.EXE to remove old Drivers

    a. Unplug the USB Compound device. 

    b. Open Start->Settings->ControlPanel->Add/Remove Programs.

    c. Select "MosChip USB Compound Device" click change/remove. 	    

    d. At the next dialog, Click "OK" button. 

    e. Then click "RebootNow" button to reboot the system. 



======================================
2. Windows98SE/ME Driver Installation
======================================

This section will present the steps needed to install or update the Drivers 
for MosChip USB Compound Device products.

For this example, the MCS7715 was used as the test case.
This device offers One Serial Port, and one IEEE-1284 style Parallel Port.


1. Download the appropriate Drivers from the Web-Site.
-------------------------------------------------------

    a. http://www.moschip.com
	i) Click the "Products" button.
	ii) Click the "USB" button.
	iii) In the row for the product you wish to install, click 
              "Drivers, Release Notes and Installation Guides".
	iv) Click the icon under the Operating System you are using.

    b. Allow the ".zip" file to be downloaded to your local computer.

    c. Unzip the Driver files to a directory on your Hard Disk.

    d. Check the new folder with the Driver files for a "Readme" file that 
       may have additional or special installation instructions. Use those 
       instructions in addition to, or instead of, these instructions if 
       present.


2. Installing Drivers for the first time.
------------------------------------------
    a. Turn the computer ON.

    b. Run the Setup.EXE program. This program is usually 
       located in the Installation disk supplied with this product.

    c. Setup dialog will display 'Press "Install" button to Install the 
       drives for Moschip USB Serial/Parallel compound device. For cancelling 
       the installation press "Exit" button.'.

    d. Press "Install" to start the installation.

    e. Now the installer will display a message "Installation is in
       Progress... Please Wait!"

    f. Then the installer should display "Moschip USB to Serial/Parallel Adapter 
	   Drivers Installed. Press "Reboot Now" for installation to take effect. 
	   Else press "Reboot Later"."

    g. Click "Reboot" for the changes to take effect.
	
    h. After the machine is starts back, connect the Moschip USB Serial/Parallel 
       compound device.

    i. Windows should detect the new USB device, and automatically install 
       the drivers for the new hardware connected.
    
    j. When the Windows desktop is displayed, the Driver updation is complete.


3. Updating / Reinstalling Drivers:
------------------------------------------

    a. Turn the computer ON.

    b. Run the Setup.EXE program. This program is usually 
       located in the Installation disk supplied with this product.

    c. Setup dialog will display 'Press "Install" button to Install the 
       drives for Moschip USB Serial/Parallel compound device. For cancelling 
       the installation press "Exit" button.'.

    d. Press "Install" to start the installation.

    e. Now the installer will display a message "Installation is in
       Progress... Please Wait!"

    f. Then the installer should display 
       " Driver for this device is already installed in this system! To update/reinstall 
       press OK! To abort installation press cancel!". Press OK to Update the drivers.

    g. Then the Installer should display "Moschip USB to Serial/Parallel Adapter 
	   Drivers Installed. Press "Reboot Now" for installation to take effect. Else press 
       "Reboot Later"."

    g. Click "Reboot" for the changes to take effect.

    h. After the machine is starts back, connect the Moschip USB Serial/Parallel 
       compound device.

    i. Windows should detect the new USB device, and automatically install 
       the drivers for the new hardware connected.
    
    j. When the Windows desktop is displayed, the Driver updation is complete.


4. Check Driver Installation.
------------------------------

    a. Open the Windows Device Manager
	i) Right-Click the "My Computer" icon on the Desktop.
	ii) Select "Properties" from the drop-down menu.
	iv) Click the Device Manager tab to show the current Hardware list.

    b. Confirm that the New Hardware has been included
	i) "MosChip USB Compound Device" is in the Universal Serial Bus Controllers. 
	ii) "MosChip USB Serial COMn"  in Ports (LPT & COM) categery 
	ii) "MosChip USB Parallel LPTn"  in  Ports (LPT & COM) categery 
	iii) In our case, one  Serial Port and one Parallel Ports were added.


Note:
-----
Please refer to Parallel Port Printer Installation.txt for instructions on 
how to install MCS77XX Parallel Port adapter and then Printer driver and 
in case there is still a problem printing, run MosUsbPrintConfig.exe.


5. Removing Previously Installed Drivers
-----------------------------------------

Sometimes it will be desirable or even necessary to remove the previously installed 
drivers, so that a new, clean installation can be performed. Drivers can get 
corrupted when being written to their installation medium (CD-ROM etc.). If this 
happens, the drivers may not install properly.Even if the installation proceeds 
without errors, the drivers may not work. Sometimes older outdated drivers are 
shipped with a product. Newer machines may require newer updated drivers, but the 
older drivers prevent them from being installed. The easiest way to remove old 
drivers is to use the MosUnst.EXE program (located in WINDOWS\System 
directory or in the Installation disk supplied with the product). 


Using MosUnst.EXE to remove old Drivers

    a. Unplug the USB Compound device. 

    b. Open Start->Settings->ControlPanel->Add/Remove Programs.

    c. Select "MosChip USB Compound Device" click Add/remove. 	    

    d. At the next dialog, Click "OK" button. 

    e. Then click "RebootNow" button to reboot the system. 



###############################
END OF THE INSTALLATION NOTES
###############################